Q. Lin

最新

A Miniaturized Ingestible Capsule with Integrated ASIC for Energy-Efficient Sensing in the Gastrointestinal Tract
A 141GΩ Input Impedance Frontend IC for Biopotential Recordings with a Customized I/O Device Shielding Parasitic Capacitance
A 200-MHz-BW 163-dB-FoM VCO-Based MASH 3-1 ΔΣ ADC With All-Pass-Filtering Gm-C Integrator in 16-nm FinFET
A High-Gain, Low-Voltage Operational Amplifier With Bias-Stress and PVT Robustness for Large-Area Temperature Sensing on LTPS Substrates
Advances and Challenges in Integrated Circuits for Electrochemical Sensing: Enabling Next-Generation Biomedical and Molecular Applications
An 80 MS/s 70.8 dB-SNDR Radiation-Tolerant Semi-Time-Interleaved Pipelined-SAR ADC for Space Applications
An Energy Efficient Amplifier With a Closed-Loop G m-Boosting Stage and Current-Mirror-Based SR Enhancement for Driving Large Capacitive Loads
CMOS-Compatible Biosensing Platform for Multiplexed Lactate and PH Monitoring in Low-Volume Biosamples
Static and Statistical Modeling of LTPS TFTS for Robust Analog Design: Verified Through Amplifier and Comparator Measurements
A novel chest-based PPG measurement system
An 80MS/s 70.79 dB-SNDR 60.7 fJ/Conv-Step Radiation-Tolerant Semi-Time-interleaved Pipelined-SAR ADC
An Energy Efficient Amplifier with a Closed Loop Gm-Boosting Output Stage for Large Capacitive Loads Achieving 686,685 MHz▪ pF/mA IFoMs
Light-to-digital converter
Single-crystalline monolayer MoS2 arrays based high-performance transistors via selective-area CVD growth directly on silicon wafers
A 22µW peak power multimodal electrochemical sensor interface IC for bioreactor monitoring
A 30-μW 94.7-dB SNDR noise-shaping current-mode direct-to-digital converter using triple-slope quantizer for PPG/NIRS readout
A multichannel electrochemical sensor interface IC for bioreactor monitoring
Analog-to-digital converter circuitry, an integrated circuit device, a photoplethysmogram detector, a wearable device and a method for analog-to-digital conversion
High-throughput nanopore-FET array readout IC with 5-MHz bandwidth and background offset/drift calibration
Photoplethysmography (PPG) sensor circuit design techniques
28.3 A 28μW 134dB DR 2nd-Order Noise-Shaping Slope Light-to-Digital Converter for Chest PPG Monitoring
A 134 DB dynamic range noise shaping slope light-to-digital converter for wearable chest PPG applications
Ppg sensors for the new normal: a review
A 119dB dynamic range charge counting light-to-digital converter for wearable PPG/NIRS monitoring applications
Wearable multiple modality bio-signal recording and processing on chip: A review
A 196μW, reconfigurable light-to-digital converter with 119dB dynamic range, for wearable PPG/NIRS sensors
A 400 GΩ input-impedance active electrode for non-contact capacitively coupled ECG acquisition with large linear-input-range and high CM-interference-tolerance
A 0.6 V 3.8 μW ECG/bio-impedance monitoring IC for disposable health patch in 40nm CMOS
A 400GΩ Input-Impedance, 220MV pp Linear-Input-Range, 2.8 V pp CM-Interference-Tolerant Active Electrode for Non-Contact Capacitively Coupled ECG Acquisition